Motor Works West Questions? For best response, email Dave
or give us a call at (201) 847-8877
Northern New Jersey's only independent Dinan Authorized Dealer
Home Directions About Us Technology Motorsports Gallery  NOW AVAILABLE!  New Products from Dinan

New products

Dinan Launches New Ultra Light Forged Wheels For M5/M6

The new Dinan Ultra Light Forged wheel greatly reduces unsprung weight thus improving your BMWs grip, braking and ride quality. Each wheel is cut from a single solid monoblock forging of aluminum, and the "I beamed" spoke design yields an extremely stiff yet lightweight wheel. In fact these forged wheels are the lightest 20 inch diameter wheels on the market, and the open spoke design will help improve brake cooling as well. Extreme lightness, maximum stiffness and an aggressive thin spoke design, sets these wheels apart from the crowd every time.

Built to Dinan specific offsets, and sized at 20" x 9.5" front and a 20" X 10.5" rear, these wheels accommodate substantially larger tires without any rubbing or modification of the wheel well.  In addition, this custom sizing and offset allows for an increase in  front tire size from the stock 265mm  to 285mm. In the rear tires size can increase from a stock 285mm size to305mm. This is a dramatic increase in contact patch and corresponding grip level, which allows power to be put to the ground much more efficiently especially in modified M5/M6 applications.

Available in Matte Black or Silver. MSRP $ 6450.00

Dinan Launches Axle Back Exhaust for the Latest M5
Dinan's new F10 M5 Free Flow exhaust system features 100% stainless steel construction measured to exact specifications to ensure proper fit via factory hangers and mounting points. Dyno tuned for maximum exhaust flow with minimum backpressure, this system is designed to provide a more aggressive sound under acceleration, while reducing drone inside the vehicle, thanks to Dinan's exclusive Helmholtz Chamber and Butterfly Valve technologies. The exhaust gasses exit through larger laser engraved polished or optional ultra durable satin black ceramic coated quad tips. 

MSRP $ 3999.00

Now Available: Carbon Fiber High Flow Air Intake/Strut Tower Brace for F10 550i

  The Dinan Carbon Fiber High Flow Air Intake/Strut Tower Brace looks as good as it performs, allowing more outside air to be pushed into the engine via twin-ducts while also providing structural stiffness to the strut towers.  Two new air inlets are added, each with its own high flow filter mounted into the mouth of the carbon fiber inlet.  The stock air inlet is fully functional to provide four intakes into the engine for maximum airflow.  The filtered air passes from the inlets into the black powder coated ducts then directly into the engine.    

 The Dinan Engineering team had a special challenge with the F10 550i.  With very little room to work with under the hood the team came up with the ingenious idea of combining the shock tower brace and the inlet tube into one part.  The results are beautiful and purposeful looking.


  + More Power +10 HP & +8 lb-ft of Torque (with Software Upgrade)
  + Beautiful Dual Carbon Fiber Inlets
  + Integrated Strut Tower Brace
  + Stock System Stays Completely Functional


  2011-2012 F10 BMW 550i
  2011-2012 F10 BMW 550i xDrive​

Please contact Dave via email or at (201) 847-8877 with further questions.


SHOP ALL F10 550i DINAN Performance Upgrades


Other DINAN F10 550i Engine Upgrades:


Free Flow Exhaust Polished Tips

F10 550i now sounds as good as it looks.  Great sound, looks and power.  What more could you want.




 Free Flow Exhaust Black Tips

F10 550i now sounds as good as it looks.  Great sound, looks and power.  What more could you want.




 High Performance Air-to-Water Intercoolers

More power, great looks, more consistent performance and no downside by upgrading to the DINAN High Performance Intercoolers for the N63 twin-turbo V8...  




Performance Software Upgrade

Stage 2 = Just the START

After many hours of further research, tuning and testing we have improved on our hugely popular Stage ...


Need to know more?      Contact Dave via e-mail or at (201) 847-8877.


Dinan Platinum Dealer

We are Northern New Jersey's only independent Dinan-authorized dealer, serving all of The Tri-State area.

Thanks to all of our Dinan clientele for making us the #1 independent U.S. Dinan dealer in total sales during 2012.  

Dave Bogert, owner


Want more info? 

Contact Dave
e-mail or at
(201) 847-8877



Member of the BMW Car Club of America

Member of the BMW Car Club of America

ASE Certified 

ASE Certified

BIMRS Member

Licensed NJ Motor Vehicle Emission Repair Facility

Licensed NJ Motor Vehicle Emission Repair Facility

Copyright (c) 1999-2013  Motor Works West, Inc.  All Rights Reserved.      471 W Main St,   Wyckoff, NJ   07481